4000 --- 4200 4250 --- ALL TUBE DIVIDER --- ALL INSTRUMENTS

Wurlitzer 4100 and 4150

The Wurlitzer 4100 and 4150 are vacuum tube divider organs first manufactured in 1959.

The Wurlitzer 4460 is a free reed organ first manufactured in 1961, and it shared certain parts with earlier tube models. So, some 4460 parts can be found on this page.

The drawings below are for the following Wurlitzer organ models:

4100
4102
4100B
4100BW

Cabinet parts

The following drawings depict cabinet parts for the Wurlitzer 4100, 4102, 4100B and 4100BW.

  • 500709 (Console leg assembly for the Wurlitzer 4100)

  • 500711 (Bottom ferrule for the 4100)

  • 500712 (Console leg assembly for the 4100)

  • 500714 (Bottom ferrule for the 4100)

  • 500715 (Top ferrule for the 4100)

  • 500716 (Music panel face plate for the 4100)

  • 500717 (Music panel spacer for the 4100)

  • 500761 (Baffle for the 4100)

  • 500762 (Grille cloth for the 4100)

  • 500848 (Hinge for the 4100)

  • 500849 (Dowel for the 4102)

  • 500871 (Hinge for the 4100)

  • 500881 (Leg top anchor for the 4100)

  • 502885 (Leg assembly, complete, for the 4100BW)

  • 503115 (Foot pad for the 4100B and 4100BW)

Blueprint or technical drawing with handwritten notes and sketches for a console leg assembly. Includes tables with part numbers, descriptions, scales, and approval stamps. Text mentions finish application before assembly, scale 1/2 inch = 1 foot.
Technical drawing of a bottom ferrule made of brass with dimensions and annotations, showing a circular hole with a diameter of 0.050 inches and a square with a side of 1/4 inch, labeled with part details and manufacturer information.
Blueprint drawing of a console leg assembly with detailed measurements and specifications.
Technical drawing of a metal part, labeled as Bottom Ferrule, with measurements and specifications, created by The Wurlitzer Co., DeKalb Division, Illinois.
Technical engineering drawing of a square component, with dimensions and notes, from The Wurlitzer Company, property of Corinth division, dated 1955.
Technical drawing of a music panel face plate with dimensions, details for satin finish, lacquer dipped material, and construction notes.
Technical drawing of a small mechanical part labeled as made of medium hard rubber, with various dimensions marked.
Blueprint drawing of a baffle, showing detailed measurements and specifications, with annotations and notes related to the design and manufacturing process.
A technical engineering drawing or blueprint with handwritten notes and measurements, showing part details and company information, with purple ink on a pale background.
Technical drawing blueprint for a hinge, including measurements, materials, and manufacturer information.
Technical drawing sheet from The Wurlitzer Company with handwritten notes, dimensions, and specifications for a brass instrument part, featuring a diagram with a 45-degree angle and measurement annotations.
Technical engineering drawing of a hinge with detailed measurements, annotations, and material specifications, produced by The Wurlitzer Company for the Corinth Division.
A technical drawing or blueprint of a mechanical part, possibly a flange or mounting plate, with detailed measurements and annotations.
A technical blueprint or engineering drawing of mechanical parts labeled with part numbers and measurements, produced by The Wurlitzer Company in Corinth, Mississippi.
Technical drawing of a foot pad, showing top view and cross-section, with measurements and notes about materials and finish. The drawing includes caution notes, revision history, and company information. 
350
420
4100
4100BW
4150
4460

Electronic parts

The drawings below include electronic components in the 4100, 4150, and 4460 models:

  • 500313 (Switch plate for the Wurlitzer 4100)

  • 500630 (Terminal strip and eyelet assembly for the 4100)

  • 500631 (Terminal strip resistor and eyelet assembly for the 4100)

  • 500632 (Terminal strip, lower, for the 4100)

  • 500633 (Terminal strip, upper, for the 4100)

  • 500642 (Rear support block, lower left keyblock, for the Wurlitzer 4150)

  • 500754 (Tube location chart for the 4100)

  • 500829 (Wire, jumper, tone generator, for the 4100)

  • 500854 (Bayonet socket for the 4100)

  • 500858 (Shielded cable for the 4100)

  • 500862 (Output transformer for the 4100)

  • 500867 (Heater, domestic, for the 4100)

  • 501252 (Solder lug for the 4100 and 4150)

  • 501265 (Stiffener, capacitor board, for the 4100)

  • 501266 (Terminal strip for the 4100)

  • 502714 (Octal socket for the 4100 and 4460)

  • 503148 (Wire and lug assembly for 350, 420, and 4100BW)

  • 503153 (Fan for 350, 420, and 4100BW)

  • 650100 (Tube for the 4100BW)

Technical engineering blueprint for a switch plate, including labels, material specifications, and detailed diagram with measurements.
Technical blueprint drawing for a terminal strip and eyelet assembly, with detailed notes, part numbers, revisions, and specifications, issued by The Wurlitzer Company.
Technical drawing of a terminal strip resistor and eyelet assembly with annotations and specifications.
Engineering technical drawing of a part labeled 'Terminal Strip - Lower,' including dimensions and notes, produced by The Wurlitzer Company.
Technical engineering drawing titled 'Terminal Strip-Upper' including dimensions, notes, and material specifications, with revision details and approval signatures.
Blueprint drawing for a rear support block, lower left keylock, showing measurements and sanding instructions, with details like scale, date, and approval notes.
Blueprint drawing titled 'Tube Location Chart' showing measurements and annotations for a part of the '4100 Series' by 'The Wurlitzer Company' from Corinth, Mississippi, dated August 19, 1950.
Close-up of an engineering drawing or technical document with handwritten notes and printed labels, including details about wire jumper specifications and measurement scale.
Blueprint or technical drawing of a bayonet pilot lamp socket, showing measurements and specifications related to its construction.
A technical drawing or blueprint of a cable-shielded product with measurements and specifications, created by The Wurlitzer Company, Corinth Division in Mississippi.
Technical engineering blueprint of a transformer with measurements, specifications, wiring diagrams, and notes.
Blueprint drawing of a domestic heater with detailed measurements and specifications from The Wurlitzer Company, dated June 18, 1959.
Blueprint drawing with measurements and technical details, labeled as 'Solder Lug' made of sheet metal, from a 1958 technical document.
Technical drawing of a capacitor board with dimensions and specifications, from a vintage blueprint.
Technical blueprint showing a mechanical part labeled 'Terminal Strip' with measurements and specifications, including scale and revision date.
Technical drawing blueprint of an octal socket. Contains detailed measurements, annotations, and specifications for manufacturing. Drafted by The Wurlitzer Company, Corinth Division, Mississippi.
Technical blueprint for wire and lug assembly, including detailed measurements and instructions, created by The Wurlitzer Company, dated May 24, 1962.
Blueprint drawing of a fan blade assembly with detailed measurements and annotations, including notes on rotation, hub mounting, and blade securing methods.
Blueprint drawing of a fan with detailed dimensions, annotations, and notes on assembly and rotation features.
A vintage material evaluation report form from The Wurlitzer Co., dated November 1964, with handwritten notes, signatures, and various stamped and checked fields.
A handwritten parts history record sheet with columns for part number, part name, supplier, dates, inspection details, and remarks. The part number listed is 503153, part name is Fan, supplied by P.M. Motor Co., with multiple entry dates and inspecti
A historical record sheet with handwritten entries detailing part numbers, part names, supplier, dates, inspection, and remarks for parts, specifically for containers.
Blueprint of a tube model 4100BW with detailed measurements and approval signatures.
Close-up of a red stock system distribution card with black and red text, barcode, handwritten notes, and printed barcode codes. 
4100
4100BW

Ornamental parts & labeling

The drawings below are for labels and ornamental components for the 4100 and 4100BW:

  • 500756 (Name plate, percussion, for the 4100)

  • 502893 (Ornament for the 4100)

  • 503164 (Tag, caution, for the 4100BW)

  • 651062 (Silk screen for the 4100)

Technical drawing blueprint for a percussion instrument with detailed measurements and specifications.
Blueprint drawing of an ornament made of zinc casting, including a detailed illustration of the ornament's design, dimensions, hole placements, and manufacturing notes.
Technical drawing with handwritten notes and measurements for a caution tag, with the word 'CAUTION' in large letters and instructions to remove internal packing from a rotating speaker assembly, created by The Wurlitzer Company in Corinth, Mississip
Technical drawing of a silk screen template with measurements and notes, including title 'Silk Screen' and labels for multiple layers of the design. 
4100
4100B
4100BD
4100BP
4100BW
4102
4150
4460

Mechanical parts

The following include drawings for mechanical parts for the Wurlitzer 4100:

  • 500303 (Switch mounting plate for the 4100)

  • 500308 (Chassis corner for the 4100)

  • 500310 (Spacer, chassis cover, for the 4100)

  • 500314 (Tee nut for the 4100)

  • 500318 (Knurled nut for the 4100)

  • 500320 (Washer, switch mounting stud, for the 4100)

  • 500331 (Mounting frame, brace, for the 4100)

  • 500367 (Ground-out plate for the 4100)

  • 500601 (Support bracket, upper switch rod, for the 4100)

  • 500602 (Support, manual switch rods, for the 4100)

  • 500603 (Support bracket, lower switch rods, for the 4100)

  • 500604 (Support, lower switch rods, for the 4100)

  • 500605 (Retainer, lower switch rods, for the 4100)

  • 500606 (Retainer, upper switch rods, for the 4100)

  • 500608 (Switch support for the 4100)

  • 500629 (Bracket, upper manual, for the 4100)

  • 500634 (Contact wire for the 4100)

  • 500635 (Wire, switch, for the 4100)

  • 500669 (Switch bracket for the 4100)

  • 500699 (Generator frame foot for the 4100)

  • 500719 (Cleat cover, knee panel, for the 4100)

  • 500724 (Support, rear lower right, for the 4100)

  • 500725 (Support block, rear right keyblock, upper left, for the 4100)

  • 500729 (Support block, front, upper right, for the 4100)

  • 500731 (Vertical rail generator frame for the 4100)

  • 500732 (Stringer, short generator frame, for the 4100)

  • 500733 (Stringer, long generator frame, for the 4100)

  • 500737 (Pivot block chassis support for the 4100)

  • 500742 (Closure strip for the 4100)

  • 500748 (Button-head rivet for the 4100)

  • 500765 (Cleat, perc. board, for the 4100)

  • 500833 (Top ferrule for the 4100)

  • 500853 (Toe strap for the 4102)

  • 500863 (Reinforcing plate, pedal keyboard, for the 4100)

  • 500864 (Soldering lug, swell plate, for the 4100)

  • 500866 (Bracket and lug assembly for the 4100)

  • 500873 (Tube clamp, heater mounting, for the 4100)

  • 500883 (Switch wire, pedal keyboard, for the 4100)

  • 500888 (Toe assembly for the 4102)

  • 500897 (Upper right keyblock, back support, for the 4100)

  • 501005 (Actuator, bass button, for the 4150)

  • 501006 (Contact wire, bass switch, for the 4150)

  • 501007 (Contact wire, bass switch, for the 4150)

  • 501065 (Filler block, short, for the 4100)

  • 501197 (Up stop bar and felt assembly for the 4100)

  • 501202 (Support bracket interlock for the 4100)

  • 501203 (Gusset interlock for the 4100)

  • 501204 (Mounting stud bell crank for the 4100)

  • 501208 (Bracket and gusset assembly for the 4100)

  • 501210 (Support and pad assembly for the 4100 and 4460)

  • 501211 (Support and pad assembly for the 4100)

  • 501227 (Toe assembly for the 4102)

  • 501268 (Retainer, percussion rod, for the 4100)

  • 502501 (Mounting plate, switch, for the 4100A)

  • 502747 (Slide bracket, generator, for the 4100 and 4460)

  • 502780 (Tube clamp for the 4100 and 4460)

  • 502809 (Stop bracket, percussion board cover, for the 4100A)

  • 502810 (Bracket, percussion board cover, for the 4100A)

  • 502862 (Stop bracket and bumper assembly for the 4100A)

  • 502873 (Pad, counter balance, for the 4100BW, 4102BW, 4150BW)

  • 502875 (Glue block for the 4100)

  • 502896 (Spindle, music panel, for the 4100BW and 4150BW)

  • 502919 (Block, generator frame, for the 4100BW)

  • 502920 (Tube clamp for the 4100BW and 4100B)

  • 502542 (Stiffener, housing, for the 4100BW)

  • 503815 (Felt strip, down stop, for the 4100)

  • 503863 (Keyblock assembly, complete, for the 4100)

  • 503870 (Switch, basic, for the 4100BD and 4100BP)

  • 503938 (Wire contact, buss, for the 4100)

  • 503939 (Wire contact, buss, for the 4100)

  • 503940 (Switch rod, lower manual, #1, #3, for the 4100)

  • 503941 (Switch rod, lower manual, #2, for the 4100)

  • 503942 (Switch rod, upper manual, #5, for the 4100)

  • 503943 (Switch rod, upper manual, #4, for the 4100)

  • 503944 (Switch rod, upper manual, #6, for the 4100)

  • 503945 (Switch rod, upper manual, #1, #2, #3, for the 4100)

  • 504146 (Spacer block, rotating speaker, for the 4100BD and 4100BP)

  • 504147 (Support block, rotating speaker, for the 4100BD and 4100BP)

  • 504172 (Support block, rotating speaker, left hand, for the 4100BD and 4100BP)

  • 504173 (Support block, rotating speaker, right hand, for the 4100BD and 4100BP)

  • 651049 (Grommet for the 4100)

  • 651170 (Spacer for the 4100)

  • 652930 (Key block, doubling, for the 4100BP and 4100BD)

Blueprint drawing titled 'Machining Limits' from The Wurlitzer Company, Corinth Division, Corinth, Mississippi. Contains technical specifications and measurements for metal fabrication, including a diagram with dimensions of 1/2 inch and technical no
Technical engineering blueprint with detailed measurements, technical notes, and specifications for a mechanical part or assembly, including holes, distances, and diameters.
Technical engineering blueprint with handwritten annotations, dimensions, and specifications for a spacer-chassis cover, produced by The Wurlitzer Company in Corinth, Mississippi, dated August 13, 1959.
Construction blueprint for a steel part, showing detailed measurements and specifications.
A technical drawing or blueprint from The Wurlitzer Company, Corinth Division, Mississippi, showing part details for a knurled nut with labeled measurements, finish, and remarks, printed on a slightly torn sheet of paper.
Engineering blueprint with technical drawings and annotations in purple ink on beige paper.
Technical blueprint drawing of a manufacturing frame brace, with detailed measurements and specifications, produced by The Wurlitzer Company, dated March 6, 1959.
Detailed technical engineering drawing of a ground-out plate, including measurements, angles, and specifications, on vintage blueprint paper.
Technical drawing or blueprint for a support bracket upper switch rod, with detailed measurements and specifications.
Blueprint drawing of support-manual switch rods with detailed measurements and technical specifications.
Technical engineering drawing of a support bracket with detailed measurements and specifications, created by The Rudolph Wurtizer Company.
Technical engineering drawing for support lower switch rods with dimensions, part details, and manufacturing information.
Technical engineering drawing of mechanical parts with detailed dimensions and notes.
Technical engineering blueprint drawing for a part called 'Retainer - Upper Switch Rods' from Rudolph Wurlitzer Company, North Tonawanda, NY. Contains detailed measurements and specifications.
Engineering technical drawing for a switch support part, showing dimensions, material, and revision details.
Technical engineering blueprint for a bracket, showing detailed measurements and material specifications, titled 'Bracket - Upper Manual'.
Blueprint of electrical wiring details, including part numbers, dimensions, remarks, dated notes, and approval signatures, from The Wurlitzer Company, Corinth, Mississippi.
Technical engineering drawing for a wire switch, showing detailed dimensions, angles, and specifications, with text annotations about materials and manufacturing instructions.
Technical drawing of a switch bracket, showing measurements, hole sizes, and specifications from The Wurlitzer Company, Corinth Division, Corinth Mississippi.
Blueprint drawing for a generator frame foot made of red oak wood, featuring detailed measurements and specifications.
Blueprint or technical drawing of a kneepad cover for a console, with measurements and handwritten notes.
Blueprint for a support-rear lower right component made of poplar wood, with measurements and technical specifications.
Technical engineering drawing of a support block, showing dimensions, drill hole placements, and technical specifications, created by The Wurlitzer Company, Corinth Division, Corinth, Mississippi.
Technical engineering drawing of a support block for a front upper right application, made of poplar, with dimensions and technical specifications included.
Technical drawing of a vertical rail generator frame made of red oak, showing measurements and construction details from The Wurlitzer Company.
Technical blueprint drawing of a short generator frame made of red oak, showing dimensions, drilling instructions, and material details.
Technical drawing blueprint for a long generator frame made of red oak wood, showing detailed measurements and specifications.
Engineering technical drawing for a pivot block chassis support with dimensions, details, and notes on materials and drilling specifications.
Technical drawing or blueprint labeled 'Closure Strip' from 'The Wurlitzer Company' with handwritten measurements, material specifications, and revision details.
Blueprint or technical drawing of a component labeled 'Button-Head Rivet' with measurements and specifications, from The Wurlitzer Company.
Technical engineering drawing Blueprint from The Wurlitzer Company, Corinth Missouri. It includes detailed diagrams with measurements, annotations, and specifications for manufacturing or construction purposes.
Technical engineering drawing on graph paper showing measurements and specifications for a metal part, including annotations such as hole diameter and material type.
Technical engineering drawing of a toe strap with detailed measurements and specifications, created by The Wurlitzer Company, Corinth Division, Corinth, Mississippi.
A technical engineering drawing from The Wurlitzer Company, Corinth Division, Corinth, Mississippi. It shows detailed measurements and specifications for reinforcing plate pedal keyboard for a console model 4100, including dimensions of holes and mat
Blueprint drawing for a soldiering lug part, showing dimensions and technical details on an engineering sheet from The Wurlitzer Company, Corinth Division.
Close-up of an old technical drawing or schematic on yellowed paper, showing part numbers, descriptions, and diagrams related to mechanical components.
Technical engineering drawing of a tube clamp heater mounting designed by The Wurlitzer Company, Corinth Division, Mississippi, showing dimensions and specifications.
Technical schematic drawing of a switch wire pedal keyboard, including detailed measurements and specifications for material and design.
Technical drawing or blueprint of a footwear assembly, showing parts and assembly instructions with handwritten notes and signatures.
Technical engineering blueprint for upper right keylock back support, showing measurements, drilling instructions, and material specifications from The Wurlitzer Company.
Technical engineering drawing of a component part, with dimensions, annotations, and handwritten notes on a blueprint from The Wurlitzer Company, dated May 10, 1959.
A technical drawing on yellowish paper from the Wurlitzer Company, showing details of a contact wire switch for bass register, with measurements and technical specifications filled out in purple ink.
Technical drawing or blueprint with handwritten notes and measurements, including a curved line with angles, dimensions, and material specifications from The Wurlitzer Company, Corinth Division.
Close-up of an engineering blueprint or technical drawing with detailed measurements and annotations, including the title 'Filler Block Short' and manufacturer 'The Wurlitzer Company,' with handwritten notes and dates.
Blueprint drawing with a table listing part numbers and descriptions for a stop felt, stop bar, and cement, along with a diagram of a mechanical part, and a section indicating the document was created by The Wurlitzer Company in Corinth, Mississippi,
Technical blueprint of a support bracket with detailed dimensions, materials, and annotations from The Wurlitzer Company.
Engineering blueprint or technical drawing with measurements and notes, associated with property of The Wurlitzer Company, based in Corinth, Mississippi.
Technical engineering drawing of a mounting stud with detailed measurements and annotations, labeled as 'Mounting Stud - Bell Crank'.
Technical drawing or blueprint of a bracket and gusset interlock assembly with handwritten labels and specifications, including part numbers and remarks.
Technical drawing or engineering blueprint showing a support and pad switch rod assembly with detailed diagrams and notes.
Technical engineering drawing of a support and pad assembly, showing parts numbered 1 through 3, with notes on holes and assembly details, created by The Wurlitzer Company.
Technical blueprint or engineering drawing showing parts and assembly with labels, annotations, and a schematic diagram.
Technical drawing blueprint of a percussion rod retainer with measurements and specifications, labeled with details such as material, tolerance, and creator information.
A technical engineering blueprint showing details of a mounting plate switch, including dimensions, hole placements, and notes on the material and finish.
Blueprint drawing for a slide bracket generator, featuring dimensions, notes, and material specifications, with handwritten annotations and signatures.
Blueprint drawing of a tube clamp made of aluminum with detailed dimensions and specifications, created by The Wurlitzer Company in Corinth, Mississippi.
Technical engineering drawing of a mechanical part with measurements and annotations.
Technical blueprint drawing of a bracket with dimensions and annotations, created by The Wurlitzer Company, Corinth, Mississippi.
Technical drawing or blueprint of a vehicle component, specifically related to the bumper assembly, with handwritten notes and measurements.
Technical drawing or blueprint created by The Wurlitzer Company, Corinth, Mississippi.
Technical drawing blueprint created by The Wurlitzer Company, dated November 1961.
Technical blueprint or engineering drawing for a glue block. The drawing includes measurements, material specifications, and revision notes. The document is from the Wurlitzer Company, located in Corinth, Mississippi.
Blueprint or technical drawing for a musical instrument, specifically a spindle, with detailed measurements and specifications, with water stains and damage on the paper.
Technical engineering drawing of a structural block with annotations and measurements, created by The Wurlitzer Company, Corinth, Mississippi.
Blueprint drawing of a cable clamp with detailed measurements and specifications.
Technical drawing of a stiffener-housing with dimensions, annotations, and approval signatures, created by The Wurlitzer Company in Corinth, Mississippi.
Blueprint for a felt strip with detailed measurements and specifications, including material, thickness, weight, and treatment details, created by The Wurlitzer Company.
Technical blueprint or engineering drawing for a key lock assembly, showing measurements, labels, and revision notes, with the company's name 'The Wurlitzer Company' at the bottom.
Technical drawing of a basic switch, showing dimensions and component details.
Technical blueprint drawing for wire contact bus, with detailed measurements, notes, revision history, and manufacturer information.
Technical engineering blueprint or drawing for a wire contact bus, with annotations, measurements, and notes, created by The Wurlitzer Company.
Technical drawing of a switch rod lower manual for Model A100. The drawing includes detailed measurements and specifications, with notes about material and finish, and information about revisions and approval.
Technical blueprint showing the design and dimensions of a switch rod lower manual. The drawing includes measurements, section views, and notes related to the manufacturing process.
Technical engineering drawing of a switch rod upper manual, including detailed measurements, section views, and construction notes from a blueprint. The document is annotated with hand-written notes, signatures, and stamps.
Technical drawing of a switch rod upper manual, showing detailed dimensions, sections, and specifications for manufacturing. The drawing includes notes, measurements, and revision history on a blueprint paper.
Technical drawing of a switch rod upper manual, including measurements, section views, and manufacturing details.
Technical blueprint drawing for a switch rod, upper manual, model 4100, including various measurements, section views, and revision notes, property information, and company details.
Technical blueprint or engineering drawing of a spacer block with detailed dimensions and annotations, created by The Wurlitzer Company.
Technical engineering blueprint showing a support block, including dimensions and drilling instructions, with annotations for material and manufacturing specifications.
Blueprint for support block with detailed measurements and technical specifications, including hole size, diameter, and material options, created by The Wurlitzer Company.
Technical blueprint drawing for support block, featuring detailed measurements, assembly information, material details, revision notes, and official stamps from Wurlitzer Company.
Technical engineering drawing of a support block with measurements, hole positions, and specifications, created by The Wurlitzer Company.
Technical engineering blueprint drawing for a support bracket, including detailed measurements and specifications, created by The Wurlitzer Company.
Technical engineering blueprint displaying dimensions, material specifications, and revisions for a support bracket. Includes drawing notes, measurements in inches, and approval stamps.
Technical drawing of a grommet with measurements, created by Wurlitzer Company, property of Corinth division, dated June 29, 1962.
Technical drawing of a spacer part made of wood, with dimensions and two holes, created by The Wurlitzer Company in Corinth, Mississippi.
Technical drawing blueprint of a key block doubling, made of poplar wood, with dimensions and annotations in purple ink, produced by the Wurlitzer Company, located in Corinth, Mississippi. 
720
4100

Packaging

The drawings below include packaging for the 4100:

  • 500744 (Gummed label, shipping, for Wurlitzer 4100 and 720)

  • 500771 (Carton assembly, domestic, for the 4100)

  • 501249 (Shroud for the 4100)

A technical blueprint or drawing for a product labeled 'Gummed Label - Shipping' by The Wurlitzer Company, established 1858, with details about dimensions, scale, and manufacturing information.
Technical drawing or blueprint of parts used in packing an organ, including a list of parts and their part numbers.
Technical drawing of a rectangular object labeled as 'shroud,' showing measurements of 24 inches by 46 inches with 3-inch thickness, and notes about materials and manufacturing specifications.